Peel & Stick Acoustic Wood Wall Tile

Each tile comes with a high-tack adhesive layer pre-applied at the factory, designed for long-term wall mounting when installed on a clean, smooth, dry surface. For best results, press firmly across the entire tile for several seconds after placing it — this is what activates full contact and long-term hold. Avoid installing over dusty, textured, or freshly painted walls (paint needs to fully cure first), as poor surface contact is the most common cause of tiles loosening over time.

These tiles are easier to remove than panels installed with construction adhesive, but because the backing is a genuine adhesive (not a temporary/repositionable one), removal may still pull some paint or leave adhesive residue on the wall, especially after long-term installation. We recommend this product for a wall you're happy to commit to for the medium-to-long term, and suggest checking your lease terms first if you're renting.

These tiles bond best to smooth, clean, dry, flat surfaces — such as painted drywall, plaster, or smooth plywood. They are not recommended for heavily textured walls (like stucco or popcorn ceilings texture), wallpaper, unfinished brick, or unsealed concrete, as the adhesive won't make full contact on uneven surfaces.

Each tile measures 11.8" x 23.6" (30 x 60 cm), and they're designed to align edge-to-edge along the vertical slat lines, so seams blend naturally into the wood grain pattern rather than standing out. We recommend starting from a level reference line (like a laser level or a straight edge) and working outward, and dry-fitting your layout before peeling any liners, so you can adjust spacing before it's permanent.

Yes — each tile has a polyester acoustic fiber core behind the wood-look surface, which absorbs sound waves and reduces echo and reverberation in the room. Keep in mind this improves how a room sounds (less echo), it does not block or soundproof noise coming from another room.

We don't recommend it for areas with direct water exposure or high humidity, like inside a shower or directly above a stove. While the PVC laminate surface itself resists moisture better than solid wood, the adhesive backing can lose its grip in consistently damp conditions. A dry powder room or a kitchen accent wall away from direct splash zones is generally fine.

Light dust in the felt-textured grooves is normal over time. Use a vacuum with a brush attachment or compressed air to clear the grooves, and a dry or slightly damp microfiber cloth for the surface. Avoid soaking the tiles, as prolonged moisture can weaken the adhesive.